Tnvc
Rnvg L3 White Unfilmed R210177
Product Code: RNVG123-L3WP-BLK-R210177 UPC/Barcode: 10073961
$9,299.99
Out of Stock
Right Tube
FOM 2080 SNR 32.5 Resolution 64 Lum Gain 64182 EBI 0.2 Halo 0.7Left Tube
FOM 2105.6 SNR 32.9 Resolution 64 Lum Gain 63922 EBI 0.3 Halo 0.8Click here for photos of right tube.
Click here for photos of left tube.
This package includes AB Night Vision's newly designed dovetail extension, as well as the original profile dovetail. This set of RNVG have been assembled with L3 Filmless 18UM tubes and TNVC's 10-year warranty. GA Firing Line is a TNVC dealer and the TNVC products we sell carry the same warranty offered to the customer buying direct from them, but without the wait times.
The RNVG is designed as the most rugged night vision goggle available. While most NVG’s are built with molded polymer housings, the RNVG features a 7075 aluminum chassis for unsurpassed rigidity and structural strength. All articulation points have been beefed up to increase impact resistance, giving users one tough goggle. Designed and machined at AB NightVision, and finished / assembled at TNVC, the Ruggedized Night Vision Goggle is ready to face the toughest customers and harshest environments! Traditionally, the weakest point in a night vision goggle is the joint between the optic pods and the bridge. This point accounts for the majority of catastrophic breakage when a NVG is dropped or hit. Part of this reason is that these joints are either polymer on polymer or metal on polymer interfaces. While there are some seriously impact resistant polymers out there, it’s hard to beat aluminum for strength to weight ratios. Both the optic pods and bridge in the RNVG are machined from solid billet 7075 (a material that is 36% stronger than most common steel), to give end users the strongest NVG on the market (not to mention a little piece of mind). Careful design and advanced machining keep the weight down to 20 oz. with a battery installed. The RNVG eliminates exposed wires – something commonly found in ANVIS-style night vision goggles. As the optic pods traverse during interpupilary adjustment, they ride across an electrical contact strip. This provides much increased weather/element resistance and reduces a traditional failure point. IP adjustment is accomplished with by turning dual knobs on either side of the bridge; the same as any traditional ANVIS goggle. The RNVG utilizes a single CR123 battery, and comes with an auxiliary power connector for use with ANVIS-style auxiliary battery packs such as the USGI Low Profile Battery Pack or AB Night Vision Ground Optimized Battery Pack. TNVC assembles the RNVG with milspec PVS-14 eyepieces and objective lenses. These battle proven, familiar parts add to the considerable strength of the system. Controls are simple. If you are familiar with a PVS-14, you will be right at home with the RNVG. A standard PVS-14 power knob is located on the front of the bridge. It features on/off controls, and active IR illuminator mode. Just like a 14, simply pull the knob out and twist it all the way to turn on the built-in infrared illuminator. The RNVG features a dovetail mount interface. TNVC & Night Goggles, Inc. Limited Lifetime Warranty TNVC, Inc. and Night Goggles, Inc. warrants this product for the lifetime of the product and guarantees this product to be free from manufacturing defects in material and workmanship under normal use, and transferable by the owner assuming that the product otherwise still falls within the scope of this warranty. In the event that a defect covered by this warranty occurs TNVC, Inc. or Night Goggles, Inc., at its discretion, will either repair or replace the product. Such action on the part of TNVC, Inc. or Night Goggles, Inc. shall be the full extent of the company’s liability, and the customer’s sole and exclusive remedy. This warranty applies to all TNV and NGI-branded Night Vision Device housing systems, and furthermore warrants that all Image Intensifier Tubes will be free from manufacturing defects in material and workmanship under normal use for a period of 10 years after the original date of purchase. This warranty does not cover:- Products that were used in other than normal and customary manner.
- Products that were misused.
- Products that were altered, modified, or repaired by the customer or a party other than TNVC, Inc.
- Products that were discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of TNVC, Inc.
- Damage, defects, or failures resulting from use that would be construed by any reasonable person as normal and expected “wear and tear.”