Images are for illustrative purposes only. Actual products may vary.

Bcm

Bcmgunfighter Vertical Grip Mod 3- Keymod ™- Black

Product Code: BCM-VG-KM-MOD-3-BLK UPC/Barcode: 812526020116

$19.99

Out of Stock

Sold Out



Direct Attach to KeyMod Version
  • Low-profile length for increased mobility and decreased 'snag' factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.
  Tools needed: T15 Torx Driver (not supplied)
  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod Vertical Grip
  • Push tool into the screw to extend the KeyMod anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory's recoil lugs to the intersecting KeyMod opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.
*Blue thread locker may be used on threaded fasteners